Tazman Turbinz Generator for emissions-free, off-grid electricity generation at remote natural gas well sites

Tazman Turbinz Generator Specifications

In-Pipe Turbine Generator (IPTG)

High Performance Standards

The reliability of the Tazman Turbinz Generator is built upon manufacturing excellence and precision. Many of the machined parts comprising the generator’s rotating assembly (rotors and stators, magnet carriers, and the shaft) and its housing are manufactured and handcrafted in Tazman Turbinz’s Clearwater, Florida, manufacturing facility.

Pipes and Flanges

Weight: 330 lbs / 150 kg
The weight of the IPTG (including flanges, but not including the control cable) is approximately 330 lbs / 150 kg.
Pipe Construction: 24.0 inches / 61.0 cm
The pipe consists of an ANSI schedule 80 316L stainless steel pipe with a length of 24.0 inches / 61.0 cm. An IPTG using schedule 40 pipe is under development. The nominal pipe diameter is 6” with an I.D. of 5.79” and an O.D. of 6.63”.

Pipe Pressure Ratings

The IPTG is furnished with industry-standard 316 stainless steel raised-face slip-on flanges. ASME class 600 and ASME class 900 flanges are available. All spools are hydro-tested at 2995 psi (20,650 kPa) after flange welding is completed. Both the pipes and the flanges are coated with high-quality primers and an industrial enamel finish (warm grey). The IPTG flange/pipe welding design is certified by the Alberta Pressure Equipment Safety Authority (ABSA) under Canadian Registration Number (CRN).

See below for pipe pressure in PSI and kPa, and ASMA 16.5 raised-face flange pressure ratings.

Pipe Pressure Ratings in PSI and kPa Ratings

ASMA 16.5 Raised-Face Flange Pressure Ratings

For more information about the Tazman Turbinz Generator, please contact us.

Tazman Turbinz Generator for emissions-free, off-grid electricity generation at remote natural gas well sites

Tazman Turbinz Generator Specifications

High Performance Standards

Pipes and Flanges

Pipe Pressure Ratings

How Can We Help You?